Koiler Lift
The fastest take apart reel for the production of coils
A take-apart reel model that helps operators save a lot of time. It has an expandable barrel that allows the wire coil to be lifted and transferred once made.
The sequence shows a full reel (pict.1) where the crane hooks engage in two specific positions (pict.2) so that the barrel expands and takes hold of the coil; when the coil is ready to be placed on a pallet or on the floor the hooks engage in other specific positions (pict.3) so that the barrel sectors are kept back to their position and the coil is released.
Boxy KOILER take-apart reel is also machined on the barrel and flange rims and dynamically balanced up to 40 m/sec.
Consult the DIN 46391 / 46395 and
DIN 46397 standards.
1
2
3
- Max reduction of vibrations
- No inclusion of lubricant in the internal parts of the mechanism
- The design allows flexibility with a wide range of configuration (options)
- Compact slim design
- Safe and simple to use
- Spare kit always available in 24 hours
Interchangeable bushing
Interchangeable bushing hardened to HRC 50-54 / secured by high-resistance screws
Vice
Vice to tie the wire start end – for a wire diameter 0 to 20 mm
Screwed flange
False flange fixed by high-resistance screws
Enter your information to download the data sheet
Request now your quotation
Do you already have in mind the type of product you are looking for?
Fill in the fields below: in this way we will process your request and we will be able to give you better support.
Request now the quotation
- D1 | Flange diameters = from 760 to 1250mm
- D2 | Barrel diameters = from 500mm
- D4 | Holes diameter = from 80 to 127mm
- L2 | Minimal internal width = 500mm
Enter your information and continue
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
Sending...
Request has been sent, check your e-mail
Error on sending request