Bosco Lift
Take-apart reel with one central screw -lifting and removing coils
This model has an opening system with the following sequence: remove the safety pin -pict.1- and unscrew the central screw -pict.2-
The coil is lifted and removed by the barrel sectors expanding to take hold of it -pict.3- Then the take-apart reel is reassembled -pict.4-
The BOSCO-LIFT is machined in the winding surfaces and dynamically balanced up to 40 m/sec. CE-certified and supplied with use and maintenance manual.
Consult the DIN 46391 / 46395 and
DIN 46397 standards.
1
2
3
4
- Max reduction of vibrations
- No inclusion of lubricant in the internal parts of the mechanism
- The design allows flexibility with a wide range of configuration (options)
- Compact slim design
- Safe and simple to use
- Spare kit always available in 24 hours
Interchangeable bushing
Interchangeable bushing hardened to HRC 50-54 / secured by high-resistance screws
Vice
Vice to tie the wire start end – for a wire diameter 0 to 20mm
Screwed flanges
False flange fixed by high-resistance screws to make coils of different/smaller height
Barrel sectors fixed
Barrel sectors fixed by high-resistance screws to make coils of different/bigger diameter
Enter your information to download the data sheet
Request now your quotation
Do you already have in mind the type of product you are looking for?
Fill in the fields below: in this way we will process your request and we will be able to give you better support.
Request now the quotation
- D1 | Flange diameters = from 500 to 1500mm
- D2 | Barrel diameters = from 400mm
- D4 | Holes diameter = from 80 t0 250mm
- L2 | Minimal internal width = 400mm
Enter your information and continue
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
Sending...
Request has been sent, check your e-mail
Error on sending request