Reel Z2
Ring Nut Take-Apart Reel to make Z2 Coils
The best solution to make Z2 coils. This reel is machined in the winding parts and dynamically balanced.
This model has a system operated by a ring nut screwed up to the central tube -pict.1-
Once the top flange is lifted -pict.2- the coil lying on the bottom flange is ready to be removed -pict.3-
The take-apart reel of the picture is for application with a cardboard tube only – however we can also offer the option to make coils with and without a cardboard tube by using steel sectors.
The reel is machined in the winding surfaces and dynamically balanced up to 40 m/sec.
Consult the DIN 46391 / 46395 and
DIN 46397 standards.
1
2
3
- Max reduction of vibrations
- No inclusion of lubricant in the internal parts of the mechanism
- The design allows flexibility with a wide range of configuration (options)
- Compact slim design
- Safe and simple to use
- Spare kit always available in 24 hours
Steel sectors
We also offer the version that also allows the production of coils without cardboard tube by applying steel sectors.
Enter your information to download the data sheet
Request now your quotation
Do you already have in mind the type of product you are looking for?
Fill in the fields below: in this way we will process your request and we will be able to give you better support.
Richiedi Ora Il Preventivo
- D1 | Flange diameters = from 400 to 800mm
- D2 | Barrel diameters = from 250mm
- D4 | Holes diameter = from 33 to 127mm
- L2 | Minimal internal width = 150mm
Enter your information and continue
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
Sending...
Request has been sent, check your e-mail
Error on sending request