Koiler
Take-apart reel with a single central screw in the top flange
This kind of take-apart reel has a very quick opening system. Just unscrew the only screw on the top flange.
The sequence shows a full take-apart reel with the safety screw removed -pict.1-, the top flange and barrel sectors collapsed to be removed from the coil -pict.2- and the coil lying on the bottom flange -pict.3-
The KOILER is machined in the winding surfaces and dynamically balanced up to 40 m/sec.
CE-certified and supplied with use and maintenance manual.
Consult the DIN 46391 / 46395 and
DIN 46397 standards.
1
2
3
- Max reduction of vibrations
- No inclusion of lubricant in the internal parts of the mechanism
- The design allows flexibility with a wide range of configuration (options)
- Compact slim design
- Safe and simple to use
- Spare kit always available in 24 hours
Interchangeable bushing
Interchangeable bushing hardened to HRC 50-54 / secured by high-resistance screws
Vice
Vice to tie the wire start end – for a wire diameter 0 to 20 mm
Screwed flange
False flange fixed by high-resistance screws to make coil of smaller height
Enter your information to download the data sheet
Request now your quotation
Do you already have in mind the type of product you are looking for?
Fill in the fields below: in this way we will process your request and we will be able to give you better support.
Request now the quotation
- D1 | Flange diameters = from 760 to 2000mm
- D2 | Barrel diameters = from 355mm
- D4 | Holes diameter = from 80 to 200mm
- L2 | Minimal internal width = 280mm
Enter your information and continue
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
* The fields are mandatory
Sending...
Request has been sent, check your e-mail
Error on sending request